BC214LBBC214LB
PNP General Purpose Amplifier
•This device is deisgned for use as general purpose amplifiers and switches requiring collector currents to 300mA.•Sourced from process 68.
1
TO-92
1. Emitter 2. Collector 3. Base
Absolute Maximum Ratings* Ta=25°C unless otherwise noted
SymbolVCEOVCBOVEBOICTJ, TSTG
Collector-Emitter VoltageCollector-Base VoltageEmitter-Base VoltageCollector Current (DC)-- Continuous
Operating and Storage Junction Temperature Range
Parameter
Value-30-45-5.0-500- 55 ~ 150
UnitsVVVmA°C
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1)These ratings are based on a maximum junction temperature of 150 degrees C.
2)These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations
Electrical Characteristics Ta=25°C unless otherwise noted
Symbol
Off CharacteristicsV(BR)CEOV(BR)CBOV(BR)EBOICBOIEBOhFEVCE(sat)VBE(sat)VBE(on)fTNFhfeCOB
Parameter
Test Condition
IC = -2mA, IB = 0IC = -10µA, IE = 0IE = -10µA, IC = 0VCB = -30V, IE = 0VEB = -4V, IC = 0VCE = -5V, IC = -2mAIC = -10mA, IB = -0.5mAIC = -100mA, IB = -5mAIC = -100mA, IB = -5mA VCE = -5V, IC = -2mAVCE = -5V, IC = -10mAf = 100MHz
VCE = -5V, IC = -200µARG = 2kΩ, f = 15.7KHzIC = -2mA, VCE = -5Vf = 1KHz
VCB = -10V, f = 1MHz
200-0.6200
2.040010
pF
140Min.-30-45-5.0
-15 -15400-0.25-0.6-1.1-0.72
VVVMHzdB
Max.
UnitsVVVnAnA
Collector-Emitter VoltageCollector-Base VoltageEmitter-Base VoltageCollector Cut-off CurrentEmitter Cut-off CurrentDC Current Gain
Collector-Emitter Saturation VoltageBase-Emitter Saturation VoltageBase-Emitter On VoltageCurrent gain Bandwidth ProductNoise Figure
Small Signal Current GainOutput Capacitance
On Characteristics *
Small Signal Characteristics
* Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2.0%
©2003 Fairchild Semiconductor CorporationRev. A, October 2003
元器件交易网www.cecb2b.com
BC214LBThermal Characteristics TA=25°C unless otherwise noted
SymbolPDRθJCRθJA
Parameter
Total Device DissipationDerate above 25°C
Thermal Resistance, Junction to CaseThermal Resistance, Junction to Ambient
Max.6255.083.3200
UnitsmWmW/°C°C/W°C/W
©2003 Fairchild Semiconductor CorporationRev. A, October 2003
元器件交易网www.cecb2b.com
BC214LBPackage DimensionsTO-924.58–0.15+0.250.46 ±0.1014.47 ±0.404.58 ±0.201.27TYP[1.27 ±0.20]3.60 ±0.201.27TYP[1.27 ±0.20]0.38–0.05+0.103.86MAX1.02 ±0.100.38–0.05+0.10(R2.29)(0.25)Dimensions in Millimeters©2003 Fairchild Semiconductor Corporation
Rev. A, October 2003
元器件交易网www.cecb2b.com
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is notintended to be an exhaustive list of all such trademarks.
ACEx™FACT Quiet Series™ActiveArray™FAST®
FASTr™Bottomless™
FRFET™CoolFET™
CROSSVOLT™GlobalOptoisolator™
GTO™DOME™
HiSeC™EcoSPARK™
2CMOS™I2C™E
EnSigna™ImpliedDisconnect™FACT™ISOPLANAR™Across the board. Around the world.™The Power Franchise™
Programmable Active Droop™DISCLAIMER
LittleFET™
MICROCOUPLER™MicroFET™MicroPak™MICROWIRE™MSX™MSXPro™OCX™OCXPro™OPTOLOGIC®OPTOPLANAR™PACMAN™POP™Power247™PowerTrench®QFET®QS™
QT Optoelectronics™Quiet Series™RapidConfigure™RapidConnect™
SILENT SWITCHER®SMART START™SPM™Stealth™
SuperSOT™-3
SuperSOT™-6SuperSOT™-8SyncFET™TinyLogic®TINYOPTO™TruTranslation™UHC™UltraFET®VCX™
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANYPRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANYLIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTORCORPORATION.As used herein:
1. Life support devices or systems are devices or systems2. A critical component is any component of a life supportwhich, (a) are intended for surgical implant into the body,device or system whose failure to perform can beor (b) support or sustain life, or (c) whose failure to performreasonably expected to cause the failure of the life supportwhen properly used in accordance with instructions for usedevice or system, or to affect its safety or effectiveness.provided in the labeling, can be reasonably expected toresult in significant injury to the user.
PRODUCT STATUS DEFINITIONSDefinition of Terms
Datasheet IdentificationAdvance Information
Product StatusFormative or In DesignFirst Production
Definition
This datasheet contains the design specifications forproduct development. Specifications may change inany manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.
This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design.This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.
Preliminary
No Identification NeededFull Production
ObsoleteNot In Production
©2003 Fairchild Semiconductor CorporationRev. I5
因篇幅问题不能全部显示，请点此查看更多更全内容